Operating Instructions - Fieldmann FDN 3025-A Manual

EN 12

Operating instructions

7. OPERATING INSTRUCTIONS
Operation
This product must not be used by children and persons with physical or mental impairments or by
inexperienced persons, unless properly trained or schooled in the safe use of the product, or unless they
have been properly supervised by a qualifi ed person who will be responsible for their safety.
Use extra care if the product is used near children. Always keep the appliance out of reach of children.
Children must be supervised to ensure that they do not play with the product.
Never allow children or persons who do not know the contents of this user's manual to work with the device.
Local regulations may set the minimum age of the user. The user is responsible for damages caused to third
parties in the machine's working area as a result of its use.
Do not use the machine if your are tired, under the infl uence of alcohol or narcotics.
If necessary, use personal protection aids (gloves, work footwear, eye protection, respirators, etc.). Personal
protection aids reduce the risk of injury to persons.
Dress appropriately. Do not wear loose clothing or jewellery and make sure that your hair, clothing or gloves
do not come dangerously close to moving parts. Loose clothing, jewellery or long hair may become caught
in the moving parts.
Pay constant attention, watch what your are doing and think when working with power tools. Do not use
power tools if you are tired or under the infl uence of drugs, alcohol or medication. A moment of carelessness
when working with power tools may lead to serious injury.
Prevent the situation where the tool is turned on accidentally. Ensure the trigger switch is in the Off position before
connecting the power cord to the power socket. Carrying power tools with the fi nger on the main trigger switch or
connecting the power cord to the power socket when the main trigger switch is in the On position may cause injury.
Do not get in your own way. When working, always maintain a fi rm posture and balance. This will make it
possible to better control the power tool in unexpected situations.
Use clamps or a vice to fasten the workpiece. It is safer than holding the workpiece in your hand and at the
same time you have both hands free to operate the tool.
Keep the working area tidy and well illuminated. A cluttered and badly lit work area may lead to injury.
Do not work with the power tool in an explosive environment, such as for example areas where there are
fl ammable liquid, gas or powder substances. Sparks are made inside the power tool, which may cause the
ignition of fl ammable powder or vapour.
Do not work with materials containing asbestos. Use a dust mask. When working with the tool ensure there
is a safe distance from children and other persons. Distractions may lead to a loss of control over the tool.
Purpose of use
This tool is not designed for professional use.
Do not use the product for purposes other than those intended.
For safety reasons the machine must not be used as a drive engine for any other work tools and tool sets,
unless expressly permitted by the manufacturer.
Instructions for use
Turn on and operate the machine as described in the user's manual, carefully follow all instructions.
Before carrying out any kind of inspection, maintenance or repairs disconnect the charger power cable from
the mains power supply.
Use tools in good working condition for tasks for which they are designed.
FDN 3025-A