Install The Three-Way Ball Valve - Philips AUT7006 User Manual

- This product cannot be disposed of with other domestic waste products.
At the end of the product's service life, it should be returned to the place of purchase,
or at a local recycling center, indicating that it contains electric and electronic
components. The appropriate collection and treatment of the product, which
no longer are to be used, contributes to the preservation of natural resources
and avoids any potential public health risks.

1. Install the three-way ball valve

a. Turn off the cold water supply. Turn on the kitchen cold water faucet to release the
pressure and allow water to drain from the line. Disconnect the cold water hose from
the cold water valve.
Hot
b. Slide the nut of the three-way ball valve onto the 3/8" PE pipe pipe and insert the pipe
into the opening of the three-way ball valve. Tighten the nut with a wrench.
c. Install the three-way ball valve on the cold
water valve. Please don't miss the gasket
inside the three-way ball valve during
installation.
Cold
Cold
(1)
(2)
4
(1)
Gasket
(2)