Dispensing sys-
tems
Individual dispensing systems can be activated or deactivated for all
programs as follows.
...
Dispensing system
DOS...
(name of dispensing system)
Active
-
The selected dispensing system is activated. Dispensing will only
occur in the appropriate wash blocks (see "Program charts").
-
Inactive
The selected dispensing system is deactivated for all programs.
Select an option using the and arrow buttons.
Press OK to save the setting.
If the dispensing systems have been activated (
options are also available:
DOS priming
-
Vent the dispensing system.
Concentration
-
Set the dosage concentration level. The setting applies to all pro-
grams.
Change name
-
Change the name of the dispensing system.
DOS 2 Rinse aid
With
DOS
Active
Inactive
the only option shown is
Additional settings
Active
), the following
Concentration
.
81