Table of Contents
Advertisement
Figure 47. Removing a drive blank
Next steps
Replace the drive
or
replace the drive
blank.
Installing the drive blank
Prerequisites
1. Follow the safety guidelines listed in the
Safety
instructions.
2. If installed,
remove the front
bezel.
NOTE:
The procedure to install the drive blank is the same for Rear Accessed and Front Accessed configurations.
Steps
Insert the drive blank into the drive slot until the release button clicks into place.
Figure 48. Installing a drive blank
Next steps
If removed,
replace the front
bezel.
Installing and removing system components
89
Advertisement
Table of Contents
