Dell PowerEdge XR5610 Installation And Service Manual page 11

Table 1. Features available on the front view of Front Accessed configuration (continued)
Item
Figure 3. Front view of the Rear Accessed configuration with front bezel
Figure 4. Front view of the Rear Accessed configuration without front bezel
Table 2. Features available on the front view of Rear Accessed configuration
Item
1
Ports, panels, or slots
Ports, panels, and slots
Status LED control panel
Icon
Icon
N/A
PowerEdge XR5610 system configurations and features
Description
● To reset iDRAC using
system ID, ensure that
the system ID button is
enabled in the iDRAC
setup.
● If the system stops
responding during
POST, press and hold
the system ID button
(for more than 5
seconds) to enter the
BIOS progress mode.
Description
Contains the system health,
system ID, status LED.
● Status LED: Enables you
to identify any failed
hardware components.
There are up to five
status LEDs and an
11