Table of Contents
Advertisement
Figure 30. Removing the front bezel for Front Accessed configuration
Next steps
Replace the front
bezel.
Installing the front bezel
Prerequisites
Follow the safety guidelines listed in the
Locate and remove the bezel key.
NOTE:
Press both side buttons to release the two metal clips from the back of the front bezel before installation.
NOTE:
The bezel key is part of the bezel package.
Steps
1. Align the metal clips with the left and right ears of the system. Using a Philips 2 screwdriver, tighten the 4 screws to secure
the metal clips.
2. Align the front bezel with the metal clips and push the front bezel until it clicks on to the metal clips.
Safety
instructions.
Installing and removing system components
75
Advertisement
Table of Contents
