Clear Nvram [No]; Plug & Play O/S [No]; Pci Latency Timer [64] - IEI Technology PCIE-9650 User Manual

Clear NVRAM [No]

Use the Clear NVRAM option to specify if the NVRAM (Non-Volatile RAM) is cleared
when the power is turned off.
No D
EFAULT
Yes
Plug & Play O/S [No]
Use the Plug & Play O/S BIOS option to specify whether system plug and play devices
are configured by the operating system or the BIOS.
No D
EFAULT
Yes

PCI Latency Timer [64]

Use the PCI Latency Timer option to specify the PCI latency time. The latency time is
measured in units of PCI clock cycles for the PCI device latency timer register.
Configuration options are:
32
64
96
128
160
192
224
248
Page 126
PCIE-9650 PICMG 1.3 CPU Card
System does not clear NVRAM during system boot
System clears NVRAM during system boot
If the operating system does not meet the Plug and Play
specifications, this option allows the BIOS to configure all the
devices in the system.
This setting allows the operating system to change the
interrupt, I/O, and DMA settings. Set this option if the system
is running Plug and Play aware operating systems.
Default