Subscriber Features; Auto Receipt; Automatic Login (Apt/Dpt Integration Only) - Panasonic KX-TVA50 Feature Manual

2.3 Subscriber Features

2.3.1 Auto Receipt

Description
Allows a subscriber or the System Manager to receive a message to confirm the reception of sent messages.
When the sent messages are received by a subscriber, the sender will receive a message announcing
"(mailbox name/number) has received your message". Subscribers need to request the Auto Receipt when
they send messages.
Conditions
•
This feature is only available when the Class of Service's "Auto Receipt" parameter is set to "Yes".
•
This feature is not available when the System Manager sends a Broadcasting Message.
•
The reception of External Delivery Messages can be confirmed using this feature as well. Subscribers can
request an Auto Receipt when sending a message to a single recipient or to all members of an External
Delivery Message List, and receive an Auto Receipt for each member in the list.
Programming Manual References
"Auto Receipt" in 2.2.2 Personal Options

2.3.2 Automatic Login (APT/DPT Integration Only)

Description
Allows subscribers to log in to their mailbox directly without entering the mailbox number. A subscriber can log
in to his or her mailbox directly by:
–
dialing an extension number of the VPS from his or her extension
–
calling the VPS from a telephone number that is assigned to log him or her into the mailbox
–
dialing (from an outside telephone) the DID number assigned to log him or her into the mailbox
–
calling the VPS so that the call is received on the trunk (CO line) assigned to log him or her into the mailbox
Conditions
•
This feature can be enabled or disabled for each mailbox by the System Administrator.
•
Access from outside telephones will be enabled automatically after a Caller ID number, DID number, or
trunk (CO line) number is assigned. A trunk (CO line) number or DID number can be assigned by the
System Administrator only.
•
When this feature is activated, "Toll Saver" is also available.
•
DID number setting for this feature is only available for the following PBXs using DPT Integration.
–
KX-TD816 (P311Q or higher)
–
KX-TD1232 (P211Q or higher)
–
KX-TD500 (V4M or higher)
–
KX-TDE series
–
KX-TDA series
*1
except KX-TDA50
Document Version 3.0 2010/06
(MPR Version 1.1 or higher)
*1
2.3.2 Automatic Login (APT/DPT Integration Only)
Feature Manual 35