Calling A Beeper; Delete Message Confirmation - Panasonic KX-TVA50 Feature Manual

2.3.9 Delete Message Confirmation

Feature Manual References
2.2.7 Call Transfer to Outside

2.3.8 Calling a Beeper

Description
Allows a subscriber to be notified by a beeper when he or she has messages. If the beeper has a display, it is
possible to send it a callback number. The callback number can be recorded when a caller leaves a message.
If the caller does not leave a callback number, the System Callback No., or the caller's number if it is received
through a telephone company's Caller ID service, will be sent instead.
Conditions
•
To utilize this feature, the following settings are necessary.
1.
Assign the "Beeper Callback No. Entry Mode" parameter of the desired mailbox to a value other than
"Disable" (see "Beeper Callback No. Entry Mode" in 2.1.4 Notification Parameters in the Programming
Manual).
2.
Edit the mailbox's "Notification Schedule" and enter the beeper number under "Dial Number" (see
2.1.4.1 Notification Schedule in the Programming Manual). Make sure to enter the PBX's trunk (CO
line) access number before the beeper number, then, enter an X after the beeper number. The X is for
the caller to enter his or her number as the callback number which will appear on the subscriber's
beeper later.
3.
Set the Notification Schedule's "Type of Device" parameter to "Beeper" (see 2.1.4.1 Notification
Schedule in the Programming Manual).
Programming Manual References
2.1.4 Notification Parameters
"System Callback No." in 2.5.4.5 PBX Parameters
2.3.9 Delete Message Confirmation
Description
Requests confirmation from the subscriber before erasing a message left in the mailbox.
Conditions
•
When messages are deleted, they will be retained until the end of the day.
•
This feature is only available when the Class of Service's "Delete Message Confirmation" parameter is set
to "Yes".
Programming Manual References
"Delete Message Confirmation" in 2.2.2 Personal Options
38 Feature Manual Document Version 3.0 2010/06