Other Equipment - National Instruments CP400X Getting Started Manual

Other Equipment

There are several required items not included in your device kit that you need to operate the
PXIe-5163. Your application may require additional items not included in your kit to install or
operate your device.
Required Items
• A PXI Express chassis and chassis documentation
• A PXI Controller or PC with a Device for PXI Remote Control system that meets the
system requirements specified in this guide and chassis documentation
Optional Items
• PXI Slot Blocker Kit, 5 slot blockers (NI part number 199198-01)
• PXI Filler Panel Kit, 17 filler panels (NI part number 778646-01)
• BNC-to-BNC cable, 50 Ω, 1 m (NI part number 781887-01)
• AUX 0 connectivity:
– SCB-19 noise rejecting, shielded AUX 0 connector block (NI part number
783959-01)
– SHH19-MH19-AUX shielded single-ended cable, 1 m (NI part number 784091-01)
– Mini-HDMI Breakout Cable to 6 BNC, 6 in. (NI part number 786979-01)
• Oscilloscope probe compensator, SMB (NI part number 786983-01)
• Probes—refer to the following table for several options compatible with the PXIe-5163.
Model
CP400X 784254-01
CP500X 784253-01
NI 5191 781785-01
SA1000X 784255-01
SA1500X 784256-01
SA2500X 784257-01
SP500C 783630-01
SP500X 783629-01
CC0550X 786846-01
CC05120X 786847-01
Table 1. Probe Options for the PXIe-5163
NI Part Number
400 MHz, 2 m, 10X cable divider probe
500 MHz, 1.2 m, 10X cable divider probe
800 MHz differential active probe
1 GHz single-ended active probe
1.5 GHz single-ended active probe
2.5 GHz single-ended active probe
100x passive probe, 500 MHz
10x passive probe, 500 MHz
5 A RMS, 50 MHz current probe
5 A RMS, 120 MHz current probe
PXIe-5163 Getting Started Guide | © National Instruments | 3
Description