Verifying The System Requirements; Unpacking The Kit - National Instruments CP400X Getting Started Manual

Verifying the System Requirements

To use the NI-SCOPE instrument driver, your system must meet certain requirements.
Refer to the product readme, which is available on the driver software media or online at
ni.com/manuals, for more information about minimum system requirements, recommended
system, and supported application development environments (ADEs).

Unpacking the Kit

Refer to the following figure to identify the contents of the PXIe-5163 kit.
1. PXIe-5163
2. PXIe-5163 Safety, Environmental, and Regulatory
Information
3. PXIe-5163 Getting Started Guide (this document)
To prevent electrostatic discharge (ESD) from damaging the module,
Notice
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the module from the package and inspect it for loose components or other signs
of damage.
Notice
Note
3. Unpack any other items and documentation from the kit.
Store the module in the antistatic package when the module is not in use.
2 | ni.com | PXIe-5163 Getting Started Guide
Figure 1. PXIe-5163 Kit Contents
1
Never touch the exposed pins of connectors.
Do not install a module if it appears damaged in any way.
2 3
4. Maintain Forced-Air Cooling Note to Users
5. Export Requirements Note to Users
4 5