Kit Contents and Other Equipment
Your kit includes an assembled TB-4163. In addition, you will need the following
items not included in your TB-4163 kit to install and use the TB-4163.
PXIe-4163
■
28 to 24 AWG signal wires
■
20 AWG ground wire
■
Number 1 Phillips-head screwdriver
■
Flathead screwdriver
■
Wire insulation strippers
■
Wire cutters
■
Visit
ni.com
for more information about the PXIe-4163.
Installing the TB-4163
Complete the following steps to install the TB-4163 with a PXIe-4163 and prepare
signal connections.
Before you begin, install the PXIe-4163 in a chassis and ensure that all signals are
disconnected from the PXIe-4163 if you have not already done so. Refer to the
PXIe-4163 Getting Started Guide
1. Prepare the wires by stripping the insulation 0.5 mm to 0.6 mm
(0.020 in. to 0.025 in.) from one end of all wires.
4
ni.com
[1]
for installation instructions.
Notice Take precautions to avoid data loss, loss
of signal integrity, degradation of performance,
or damage to the model.
Caution Take precautions to avoid injury.
Consult the model documentation for
cautionary statements when you see this icon
printed on the model. Cautionary statements
are localized into French for compliance with
Canadian requirements.
TB-4163 Features