Table of Contents
Advertisement
3.
If the module is still not listed, power off the system, ensure that all hardware is correctly
installed, and restart the system.
4.
Navigate to the Device Manager.
Operating System
Windows 10/8.1
Windows 7
5.
Verify the PXIe-5163 appears in the Device Manager.
a)
Under an NI entry, confirm that a PXIe-5163 entry appears.
b)
If error conditions appear, reinstall NI-SCOPE and the PXIe-5163.
What Should I Do if the PXIe-5163 Fails the Self-Test?
1.
Restart the system.
2.
Launch MAX, and perform the self-test again.
3.
Power off the chassis.
4.
Reinstall the failed module in a different slot.
5.
Power on the chassis.
6.
Perform the self-test again.
20 | ni.com | PXIe-5163 Getting Started Guide
Description
Right-click the Start button, and select Device Manager.
Select Start»Control Panel»Device Manager.
If you are using a PC with a device for PXI remote control system,
Note
under System Devices, also confirm that no error conditions appear for the
PCI-to-PCI Bridge.
Advertisement
Table of Contents
