Operation; Troubleshooting - U-Line H-10242 Quick Start Manual

Figure 9
PNEUMATIC HEIGHT ADJUSTMENT
• When raising/lowering table, use one hand to
support the center of top and the other hand to lift
lever. (See Figure 10)
• To raise table height, lift lever. Table will move up
gradually. Release lever when desired height is
reached.
• To lower table, lift lever and with one hand push
the center of the tabletop downward. Release lever
when desired height is reached.
OPERATING ISSUE
Legs are unusually noisy.
Rod will not fit into leg mechanism.
PAGE 3 OF 9
ASSEMBLY CONTINUED
11. Table
carefully flip the table onto its feet. (See Figure 9)
Lever

OPERATION

TROUBLESHOOTING

The table has two-stage legs that produce more noise
when one leg extends into the other.
To reduce noise, apply silicon lubricant to legs.
Slowly press down on top of leg to turn mechanism
opening. As opening turns, push rod into opening until it
is inserted fully.
Two or three person assembly is highly recommended.
1-800-295-5510
uline.com
is now fully assembled. With second person,
Figure 10
RECOMMENDATIONS
0323 IH-10242