Welding Current Setting; Arcforce; Hotstart; Antistick - EWM Taurus 301 Basic FKG Operating Instructions Manual

5.8.3

Welding current setting

The welding current is normally set using the "Wire speed" rotary dial.
Operating
element
m/min
5.8.4

Arcforce

Operating
element
DYN
- +
m/min
5.8.5

Hotstart

The hotstart device improves the ignition of the stick electrodes using an increased ignition current.
a) = Hotstart time
b) = Hotstart current
I = Welding current
t = Time
5.8.6

Antistick

099-005148-EW501
01.03.2012
Action Result
Welding current is set
Action Result
Select arcforcing welding parameter
LED for the button
Arcforcing setting for electrode types:
(Setting range -40 to 40)
Negative values
Values around zero Basic
Positive values
Design and function
is on.
Rutile
Cellulose
Figure 5-15
Anti-stick prevents the electrode from annealing.
If the electrode sticks in spite of the Arcforce device, the
machine automatically switches over to the minimum
current within about 1 second to prevent the electrode
from overheating. Check the welding current setting
and correct according to the welding task!
Figure 5-16
MMA welding
Displays
Setpoint setting
Display
41