5.4
Configuring 2250 and 2050 FACUs for LCD Annunciator using PC tool
To configure the 2250 FACU using the PC tool, complete the following steps:
From the console list, select General Options.
1.
2.
From the General Options menu, select the Annunciator tab.
3.
To configure the Annunciator select the Enable Annunciator checkbox.
You can connect a maximum number of eight annunciators to one FACU.
page 16
Foundation Series 2606-9101 LCD Annunciator Installation Guide
Figure 12: The Enable Annunciator checkbox
579-1434 Rev B