Table of Contents
Advertisement
3.
Place the back plate on the mounting surface and mark the location of the four screw holes.
Callouts
Description
A
Press here
B
Back plate
C
Screw locations
4.
Using the four provided screws, mount the Annunciator back plate on the wall or mounting surface.
5.
To attach the back plate to the housing, follow step 2 in reverse, see Figure 7.
page 9
Foundation Series 2606-9101 LCD Annunciator Installation Guide
Figure 6: Marking the location of the screw holes
Figure 7: Mounting the Annunciator back plate
579-1434 Rev B
Advertisement
Table of Contents
