5
Click on Launch Browser
Your browser points to the ATTO ExpressNAV
splash screen. If you use Internet Explorer as a
browser, continue on to the next step. If not,
continue on to
Beginning initial
Setting up Internet Explorer
1
Open your browser.
2
Select Internet Options .
3
In the Internet Options screen, select the
Security tab.
4
Click on the Trusted Sites icon.
5
Click on the Sites button.
6
In the text box Add this Web site to the zone ,
add the IP address of the appliance. You may
use wild cards.
7
Click on Add.
8
Uncheck the Require server verification
check box.
Exhibit 2.0-1 One view of how to connect the FastStream into a rack: brackets may be mounted on either the front or
the connector sides of the FastStream.
Exhibit 2.0-2 Detail of the connector side of the FastStream SC enclosure.
9
10 At the bottom of the Internet Options box, click
Beginning initial configuration
configuration.
1
2
3
Click OK.
on OK and close the box.
The ExpressNAV Storage Manager welcome
screen appears. Click on Enter Here.
Type in the user name and password.
Note
The default values are user name root and
password Password. The user name is case
insensitive and the password is case sensitive.
It is best practice to change the default user
name and password. Refer to
current user name, password
The Initial Setup page appears. Continue to
Ensure Drive Integrity
Changing
on page 26.
on page 15.
11