After creating RAID Groups
1
If you are not already in the
ExpressNAV Storage Manager,
type the IP address of your
controller in a standard browser.
On the splash screen, click
Enter Here. In the box provided ,
type in your user name and
password, and click OK .
2
Click on the Diagnostics button on the left
hand side of the ExpressNAV Storage
Manager.
3
Choose Initialize and Verify Drives to test
newly added drives that are not part of a RAID
Group. Choose Read-Only Drive Test to non-
destructively test any drives.
4
Click Next.
5
If no drives appear in the information box, click
on the System Scan button.
If drives are available, click on the drives you
wish to verify, initialize or test; the drives are
highlighted.
6
Click Commit .
CAUTION
CAUTION
Do not restart the FastStream or
disconnect or power cycle drives during
Drive Initialization and Verification or you
must start the verification process from the
beginning.
7
A warning box appears. In the warning box,
verify that you want to complete the
configuration by clicking on Yes . Clicking on No
ends the procedure without making a change.
8
The Performance tab appears showing what
tests are running and their results. You may
select other tests to run or continue on to other
tasks.
16