ATTO Technology FastStream SC 5550 Installation And Operation Manual page 5

7.0 Modify Storage ........................................................................................37
Preliminary steps
RAID Group processes
Creating RAID Groups
Deleting RAID Groups
Adding drives to a RAID Group
Adding mirrors to a RAID configuration
Changing RAID configuration: RAID migration
Modifying RAID Group mapping
Modifying RAID Group partitions
Rebuilding RAID Groups
Modifying RAID options
Importing RAID Groups
FastStream process: adding or removing Hot Spares
Removing RAID configuration data
RAID CLI page
8.0 Manage ATTO Devices, Configurations ................................................42
Creating a unique name for your FastStream 41
Discovering, managing other ATTO devices 41
Saving or restoring a configuration 42
Field Replacement Unit 43
9.0 Interface Options ...................................................................................45
Using the ExpressNAV Storage Manager 45
Using the serial port 46
Using Telnet 46
10.0 Firmware Support..................................................................................47
Dual Firmware Image Support
Selectable Dual Boot Images
*Some Appendix page numbers may have been intentionally excluded*
Appendix A Design RAID Groups ..............................................................i
JBOD: Just a Bunch of Disks i
DVRAID: Digital Video RAID i
RAID Level 0: striping, no redundancy ii
RAID Level 1: mirroring (duplicate drives) ii
RAID Level 1 plus additional mirroring ii
RAID Level 1+0: striping, mirror spans two drives iii
RAID Level 4: striping, one parity drive iii
RAID Level 5: striping, parity distributed among drives iii
RAID Level 6: striping, two parity blocks distributed among drives iv
Appendix B Multipathing ...........................................................................v
Appendix C Tape Pass-Through ...............................................................vii
Use Case vii