Table of Contents
Advertisement
3. Secure the air‐duct mounting bracket to the rails with M6 screws. Torque the
screws to approximately 5.7 Nm ± 0.1 Nm (50 inch‐pounds).
Note: Reuse the original M6 screws used to fasten the 4‐post rack mounting
brackets to secure the air duct mounting brackets with 4‐post mounting brackets
together.
4. Secure the air‐duct mounting bracket to the rack chassis with M3.5 screws. Torque
the screws to approximately 1.1 Nm ± 0.1 Nm (10 inch‐pounds).
5. Plug the power cords into their respective NE2572O power connectors and using
tie wraps, secure the power cords to the mounting rails.
© Copyright Lenovo 2018
All manuals and user guides at all-guides.com
Power connection
Air duct mounting bracket
M3.5 screws
Power connection
Tie wraps
Chapter 3: Installing NE2572O Hardware and Options
M6 screws
Tie wraps
45
Advertisement
Table of Contents
