Advertisement
52
HOW TO PERFORM SOFTWARE UPDATE (CONT.)
INSTALLATION
Ensure that the prerequisites, on the previous page have been completed.
CAUTION: During the installation, do not remove the instrument or
the USB memory device from the Base Station. When the installation
is complete, the instrument will display a message indicating that new
software has been installed. The display of this message is the indication
that it is safe to remove the instrument and USB memory device from the
Base Station.
1
Place instrument into the
base station and power-up
instrument.
3
From the Home Screen:
> More Options
> Instrument Options
> Software Installation
> Install from USB
5
OSi Software
Installation Results:
The instrument automatically restarts upon successful
installation!
Refer to onscreen details for
cause and repeat procedure.
If failure persists,
contact your local Abbott
representative.
SECTION 10
2
i-STAT Alinity — Quick Reference Guide
Insert USB into the USB
port in the base station.
4
Follow prompts until
transfer is complete.
Art: 731848-01
Rev. M
Rev. Date: 25-Jul-2022
Advertisement
