Accessories; Frequently Asked Questions - Cobra Systems VnM 8 SignMaker User Manual

Accessories and FAQ
VnM®8 SignMaker accessories sold separately, include:
Q: How do I get out of a VnM ® template?
Q: How do I correct a spelling or entry
error?
Q: How do I create quotation marks on a
sign?
Q: How do I prevent the ink ribbon from
coming out with the vinyl and being
cut?
Q: How do I correct poor print quality?
25
VnM® Label Direct
Sign Software

Frequently Asked Questions

A: To return to the main menu, or if
A: To correct the word you just typed,
A: While holding down the SHIFT key,
A: Secure the ink ribbon to the take-up
A: Make sure you are using the correct
Copyright © 2016 Cobra Systems, Inc. All rights reserved
you made an entry error, press the
ALT + EXIT keys.
use the larger arrow, bottom right on
the key pad. To correct the line you
just typed, hit CLEAR. If the error is
on a previous line, you will have to
retype your sign. Press the ALT + EXIT
keys and start over.
press the PERIOD key twice in rapid
succession.
core with a piece of tape; wind ribbon
on core to remove slack. Turn the
printer off and wait two seconds, then
turn it back on. Print a label.
print setting for the vinyl and ink
ribbon you're printing with. (Refer
to page 8 for correct print settings.)
Also, make sure the print head is
clean. (Recommend cleaning the
print head each time vinyl media
and/or ink ribbon is installed.) Keep
skin contact to a minimum when
working with vinyl media.