Accessories; Frequently Asked Questions - Cobra Systems VNM 4 Pro SignMaker User Manual

Accessories and FAQ
VnM®4 Pro SignMaker accessories sold separately, include:
Q: How do I get out of a VnM ® template?
Q: How do I correct a spelling or entry
error?
Q: How do I create quotation marks on a
sign?
Q: How do I prevent the ink ribbon from
coming out with the vinyl and being
cut?
Q: How do I correct poor print quality?
27
VnM® Travel
Case

Frequently Asked Questions

Copyright © 2020 Cobra Systems, Inc. All rights reserved
VnM® Label Direct
Sign Software
A: To return to the main menu, or if
you made an entry error, press the
ESC key.
A: To correct the word you just typed,
use the larger arrow, bottom right on
the key pad. To correct the line you
just typed, hit CLEAR. If the error is
on a previous line, you will have to
retype your sign. Press ESC key and
start over.
A: While holding down the SHIFT key,
press the PERIOD key twice in rapid
succession.
A: Secure the ink ribbon to the take-up
core with a piece of tape; wind ribbon
on core to remove slack. Turn the
printer off and wait two seconds, then
turn it back on. Print a label.
A: Make sure you are using the correct
print setting for the vinyl and ink
ribbon you're printing with. (Refer
to page 8 for correct print settings.)
Also, make sure the print head is
clean. (Recommend cleaning the print
head each time vinyl media and/or ink
ribbon is installed.) Keep skin contact
to a minimum when working with
vinyl media.