D) Multi Line Header - Cobra Systems VnM 8 SignMaker User Manual

VnM®8 Keypad Templates: Multi Line Header
The Multi Line Header template is perfect for creating custom header signs with any
neccessary text. The samples below were created with our Multi Line Header template.
SYMBOLS1 font is selected first then choose the Header template and press ENTER. For the
Header line, "/CAUTION" is shown on the keypad, press ENTER. Then enter the information
for the 1st, 2nd, 3rd and 4th line. The "/" seen on the keypad (after SYMBOLS1 font is chosen)
translates to the yield symbol.
/CAUTION
DO NOT STAND
WITHIN 25 FEET
OF MACHINERY
a) SYMBOLS1 font, 3 Line Header
NOTE: Keep in mind the 4 lines below the header are always standard BOLD font even if you
change the symbol. You do not have to print 4 extra lines when using the Multi Line Header template.
MULTI LINE HEADER
PRESS ENTER
X INCH-HOW MANY LINES?
PRESS 1,2,3, OR 4
ENTER HEADER:
/CAUTION
ENTER LINE 1:
DO NOT STAND
ENTER LINE 2:
WITHIN 25 FEET
ENTER LINE 3:
OF MACHINERY
ENTER QUANTITY TO PRINT:
1
13
1.
2.
3.
4.
5.
6.
7.
Copyright © 2016 Cobra Systems, Inc. All rights reserved
YOUR HEADER
YOUR TEXT
HERE
b) 2 Line Header
Select the Multi Line Header template
by pressing the ENTER key.
Enter the media width by pressing the
number 1, 2, 3, or 4. DO NOT PRESS
ENTER.
Enter the text/symbols for the header
and press ENTER.
Enter the text/symbols for your first
line of text and press ENTER.
Enter the text/symbols for your second
line of text and press ENTER.
Enter the text/symbols for your third
line of text and press ENTER.
Enter the quantity to print and press
ENTER.