Accessories; Frequently Asked Questions - Cobra Systems VnM NEO SignMaker User Manual

Accessories and FAQ
VnM® NEO SignMaker accessories sold separately, include:
Q: How do I prevent the ink ribbon from
coming out with the vinyl and being
cut?
Q: How do I correct poor print quality?
Q: I keep getting an error every time I
print a GHS label.
11
Maintenance Kit

Frequently Asked Questions

A: Secure the ink ribbon to the take-up
A: Make sure you are using the correct
A: Make sure to adjust your printers
Copyright © 2017 Cobra Systems, Inc. All rights reserved
core with a piece of tape; wind ribbon
on core to remove slack. Turn the
printer off and wait two seconds, then
turn it back on. Print a label.
print setting for the vinyl and ink
ribbon you're printing with. (Refer
to page 8 for correct print settings.)
Also, make sure the print head is
clean. (Recommend cleaning the
print head each time vinyl media
and/or ink ribbon is installed.) Keep
skin contact to a minimum when
working with vinyl media.
gap sesnsor to overlap your media to
recognize the gap on your labels.