Table of Contents
Advertisement
VnM®8 SignMaker Quickstart
PRINTER MUST BE TURNED OFF!
1. Open the VnM8 SignMaker.
3. Load VnM Media and feed through VnM8 Cutter.
5. Plug in VnM8 Keypad.
NOTE: Always have the VnM printer cover closed when powering on.
3
2. Load VnM Ink Roll and attach to take up core.
4. Be sure to use both hands when closing down
6. Connect power cord to the VnM8 SignMaker
Copyright © 2016 Cobra Systems, Inc. All rights reserved
the print head.
and outlet. Turn ON VnM8 SignMaker.
Advertisement
Table of Contents
Need help?
Do you have a question about the VnM 8 SignMaker and is the answer not in the manual?
Questions and answers