Table of Contents
Advertisement
VnM®8 SignMaker Power Up
Connecting VnM®8 Keypad and Power Up
1. Make sure power switch is OFF.
2. After connecting the key pad, connect the power supply into the printer.
3. Plug the printer into your power source, preferably using a surge protector.
4. Turn on the VnM8.
Plug to Outlet
IMPORTANT: Keep all magnetic devices away from the VnM8 printer.
7
Ethernet
Interface
SD Socket
USB
Interface
USB Host
RS232
Copyright © 2016 Cobra Systems, Inc. All rights reserved
Power Socket
Power On/Off
GPIO Interface
(Optional)
PS/2
Interface
Advertisement
Table of Contents
Need help?
Do you have a question about the VnM 8 SignMaker and is the answer not in the manual?
Questions and answers