F ) Die Cut - Cobra Systems VnM 8 SignMaker User Manual

VnM®8 Keypad Templates: Die Cut
The Die Cut Template is perfect for creating Caution, Danger, Warning, Notice, and Safety
signs. This template only works with 7"x10" VnM pre-printed Die Cut labels. The samples
below were created with our Die Cut Template.
HOT
SURFACE
a) Die Cut, WARNING
DIE CUT TEMPLATE
Press ENTER
X INCH - HOW MANY LINES?
Press 1,2,3, or 4
ENTER LINE 1:
HOT
ENTER LINE 2:
SURFACE
ENTER QUANTITY TO PRINT:
1
15
KEEP OUT
b) Die Cut, DANGER
MUST WEAR
EAR AND EYE
PROTECTION
d) Die Cut, CAUTION
Copyright © 2016 Cobra Systems, Inc. All rights reserved
VOLTAGE
c) Die Cut, DANGER2
EMPLOYEES
ONLY
e) Die Cut, NOTICE
1. Select DIE CUT TEMPLATES by pressing
the ENTER key.
2. Select how many lines of text to print by
pressing the numbers 1, 2, 3, or 4.
DO NOT PRESS ENTER.
3. Enter the text/symbols for your first line
and press ENTER.
4. Enter the text/symbols for your second
line and press ENTER.
5. Enter the quantity of signs to print and
press ENTER.
HIGH