Table of Contents
Advertisement
7. The signal analyzer will automatically consume the License File. (This may take a few minutes)
When the License File is consumed the Keysight License Manager will display a "Successful
License Installation" message as shown in
licenses, multiple "Successful License Installation" messages will appear. Wait until all
licenses have been consumed before removing the USB Storage Device.
Figure 2
Successful License Installation
Verify the License Installation
1. Before the licenses will be recognized, the XSA application must be restarted. Press File, Exit.
An Exit Analyzer dialog box will appear; press Enter to confirm the exit.
2. Double-click on the LaunchXSA icon on the Windows desktop. Wait for the XSA application to
finish starting (the analyzer should be sweeping).
3. Press System, Show, System on the analyzer to display a list of all displayed options. You
should see the following options listed:
— N9020A-EXM
— N9020A-CR3
— N9060A-3FP
— N9060A-4FP
— N9060A-5FP
— N9060A-6FP
— N9060A-7FP
Installation Note N9020-90230
Option HL6, External Mixing Upgrade Kit, Serial Prefix ≥ MY/SG/US5328
External Mixing
Connector Rear, 2nd IF Output
Amplitude Correction and Limit Lines
TOI and Harmonics
ACP 18 Carrier Measurement
TV Trigger and IQ Analyzer Enhancement
Zero Span, Register, Trace, and Spurious Enhancements
Figure
2. Since the license file contains multiple
9
Advertisement
Table of Contents
