Recommended Maintenance - True GDIM Series Installation Manual

Hide thumbs Also See for GDIM Series:
Table of Contents

Advertisement

Maintenance & Servicing (cont.)

Recommended Maintenance

See recommended maintenance tasks and frequencies below. Some tasks may be required more frequently based on your installation.
Maintenance Tasks
Verify the appliance maintains product temperature.
Inspect power cord for damage; if damaged, replace immediately.
Verify the power cord is fully plugged into the wall receptacle
Inspect the overall condition of the appliance and its components
(such as castors, doors, and hinges).
Verify operation of all moving parts (such as fan motors, doors and
door cords).
Check physical condition of all gaskets; verify gaskets seal correctly.
Inspect any lamps, lamp holder connections, LED modules, and LED
module connections.
Check all condenser coils (fronts and backs)for dust and debris; if
present, clear the debris.
Check physical condition of all condenser coils and evaporator coils;
straighten coil fins as needed.
Check all evaporator coils for dust and debris; if present, clear the
debris.
Verify the drain line is clear of debris.
Page 20 of 28
MODEL SERIES
Monthly
X
X
X
X
X
06/15/2023
Quarterly
X
X
X
X
X
X
X
X
X
P#975541
truemfg.com
Annually
X
X
X
X
X
X
X
X
X
X
X
TEC_TM 204 | REV. A | EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gdim-26-ntGdim-49-nt

Table of Contents