Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
22
The amount of residual solvents and acids on items going into the
cabinet should be minimal.
There should be no more than a trace of any solvents with a flash
point of below 70°F (21°C).
Chloride solutions, in particular hydrochloric acid, must not be
placed in the cabinet.
Ensure that solutions or steam containing chlorides or hydrochloric
acid do not come into contact with the stainless steel outer casing of
the machine in order to avoid any damage through corrosion.
After any plumbing work, the water pipework to the machine will
need to be primed. If this is not done, components can be damaged.
Follow the installation instructions in the operating and installation
instructions.
Advertisement
Table of Contents
