Download
Share
Print this page
Mocka Tahoe Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Mocka Manuals
  4. Indoor Furnishing
  5. Tahoe
  6. Assembly instructions manual

Mocka Tahoe Assembly Instructions Manual

Change table
Hide thumbs Also See for Tahoe:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Tahoe
Change Table
Thank you for your purchase.
Please follow the instructions below for correct assembly
C
A
B
bolt
locking
dowel
x42
nut x42
x26
F
G
H
L + R
long
L + R
screw x12
slide rail
slide rail
x4
x4
K
cover
x12
Hardware Supplied
Phillips & Flathead screwdrivers and hammer required.
*We recommend using a Flathead screwdriver to tighten
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
D
E
small
long screw
screw x16
x14
I
J
nu t
long
x4
screw x4
all locking nuts 100% before first use.
WARNING: Any furniture that is not anchored to a wall has the
W
potential to tip over in certain circumstances, i.e. if a child attempts
to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall.
We supply a free safety wall anchor with all furniture sold and we
recommend these are used to prevent your product tipping. The
fixing device provided should fit most wall types, but please note
safety
long
that different wall materials may require different fixing devices
strap
screw
from those supplied.
x1
x1
X
Y
wall
screw
anchor
x1
x1
Z
washer
x1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Tahoe and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Mocka Tahoe

Summary of Contents for Mocka Tahoe

  • Page 1 Hardware Supplied Phillips & Flathead screwdrivers and hammer required. *We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
  • Page 2 Insert 4 x locking nut (B) into panels [1] .Attach 4 x bolt (A) into panel [1]. Attach 4 x dowel (C) to panel [1] and secure with [5]. Tighten with a screwdriver. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
  • Page 3 Insert 6 x long screw (D) into panel [1] and [6] and [9]. Tighten with a screwdriver. and secure with [9]. Cover locking nuts (B) with 4 x covers (K). mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
  • Page 4 1 x right slide rail (G) to panel [4] and secure with 2 x small screw (E). Insert 4 x bolt nuts (B) with 2 x covers (K). (A) into panel [3] and [4]. Tighten with a screwdriver. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
  • Page 5 Insert 6 x bolt (A) into panel [2] . Tighten with a screwdriver. Attach 6 x dowel (C) to panel [3] and [4]. Insert 6 x locking nut (B) into panel [11] and [12] . Tighten with a screwdriver. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
  • Page 6 [3] ,[4] and [13] and secure with 6 x locking nuts (B). 4 x long bolts (J). Tighten with a screwdriver. Attach 1 x wall strap (W) to panel [13] using 1x screw(Y). Tighten with a screwdriver. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
  • Page 7 Attach 1 x right slide rail (G) to panel [4] and secure with 2 x small screw (E). Slide panel [14] and [15] between the grooves on panels [3],[4] and [13] to form the back of the unit as shown. Tighten with a screwdriver. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
  • Page 8 (B) with 6 x covers (K). Tighten with a screwdriver. and [18] and [19] to panel [16] and secure with 12 x locking nut (B). Tighten with a screwdriver. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
  • Page 9 1x safety strap (W). Fasten to the wall using 1x wall 8 x small screw(E). Tighten with a screwdriver. anchor (X), 1x washer (Z) and 1x long screw. Ensure the unit is balanced and steady before use. You’re done, enjoy! mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...