Page 1
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use. Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%. For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au...
Page 2
Insert 4 x locking nut (B) into panels [1] . Attach 4 x dowel (C) to panel [1] and secure with [5]. Attach 1 x wall strap (W) to panel [1] using 1x screw(Y). Tighten with a screwdriver. Insert 12 x bolt (A) into panel [2] and [5]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au...
Page 3
(E). Attach 1 x right slide rail (G) to panel [4] and secure with 2 x small Insert 4 x dowel (C) into panel [1]. Attach panel [1] to panels [3] and [4] screw (E). Tighten with a screwdriver. and secure with 4 x locking nuts (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au...
Page 4
Insert 4 x nuts (I) into panel [8] . Attach panel [7] to panel [8] and secure back of the unit as shown. Tighten with a screwdriver. with 4 x long bolts (J). Tighten with a screwdriver. mocka.co.nz | mocka.com.au...
Page 5
Insert 4 x dowel (C) into panel [2]. Attach panels [3] to panel [4], [3] and Attach panels [7] and [8] to panel [2] and secure with 4 x long screws(D). [4] and secure with 4 x locking nuts (B). Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au...
Page 6
Insert 8 x bolts (A) into panel [9] and [10] .Attach panels [11] and [12] to panel [9] and [10]secure with 8 xlocking nuts (B). base of the drawer as shown. Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au...
Page 7
Attach 4 x slide rails (H) to panels [11] and [12] and secure with 8 x small Attach panel [14] to panels [11] and[12] secure with 8 x medium screws(F). screw(E). Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au...
Page 8
Attach 1 x left slide rail (G) to panel [3] and secure with 2 x small screw screw. Ensure the unit is balanced and steady before use. You’re done, (E). Attach 1 x right slide rail (G) to panel [4] and secure with 2 x small screw (E). Tighten with a screwdriver. enjoy! mocka.co.nz | mocka.com.au...
Need help?
Do you have a question about the Tahoe Series and is the answer not in the manual?
Questions and answers