Advertisement
Hamptons Bedside Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
C
B
long
bolt
locking
dowel
screw x 4
x32
nut x 32
x20
G
H
handle
L + R
L + R
x 3
slide rail
slide rail
x6
x6
Hardware Supplied
Phillips & Flathead screwdrivers and hammer required
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
mocka.co.nz | mocka.com.au
F
E
D
small
long
screw x24
screw x 12
I
J
P
1
wedge
small
x6
screw x2
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
W
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
safety
long
strap
screw
x1
x1
X
Y
wall
screw
anchor
x1
x1
Z
washer
x1
1
Advertisement
Table of Contents
Related Manuals for Mocka Hamptons Bedside Table 40 mm
Summary of Contents for Mocka Hamptons Bedside Table 40 mm
- Page 1 L + R L + R screw x2 slide rail slide rail washer Hardware Supplied Phillips & Flathead screwdrivers and hammer required *We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use. mocka.co.nz | mocka.com.au...
- Page 2 2 x screws (J). Attach 1 x wall strap (W) to panel [1] using 1x screw(Y). Attach 3 x right slide rails (G) to panel [4] and secure with 6 x small screws (E). Tighten with a screwdriver. Insert 4 x bolts (A) into panels [3] and [4]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au...
- Page 3 Insert 4 x dowels (C) into panels [5]. Attach panels [5] to panels [3] and [4] and [14]. Insert 4 x locking nuts (B) into panels [14]. Tighten with a screwdriver. and secure with 4 x locking nuts (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au...
- Page 4 Insert 4 x dowels (C) into panels [3] and [4]. Attach panels [3] and [4] to panel [2] and secure with 4 x long screws (D). panel [2] and secure with 8 x locking nuts (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au...
- Page 5 Insert 4 x dowels (C) into panel [1]. Attach panels [1] to panel [3], [4] and Slide panel [7] between the grooves on panels [3] and [4] to form the [7] and secure with 4 x locking nuts (B). Tighten with a screwdriver. back of the unit as shown. mocka.co.nz | mocka.com.au...
- Page 6 Slide panels [9] between the grooves on panels [10] and [11] to form the base Insert 12 x bolts (A) into panels [8]. Attach panels [10] and [11] to panel [8], secure with 12 x locking nuts (B). Tighten with a screwdriver. of the drawer as shown. mocka.co.nz | mocka.com.au...
- Page 7 Attach 6 x slide rails (H) to panels [10] and [11] and secure with 12 x small Attach panels [12] to panels [9], [10] and [11], secure with 12 x screws (E). Insert 3 x Handles and screws (I) into panels [8] . medium screws (F). Tighten with a screwdriver. mocka.co.nz | mocka.com.au...
- Page 8 (W). Fasten to wall using wall anchor (X), washer (Z) and screw. Ensure the unit is balaced and steady before use. You’re done, enjoy! Attach 6 x wedges (P1) to panel [7] . Tighten with a screwdriver. mocka.co.nz | mocka.com.au...
Need help?
Do you have a question about the Hamptons Bedside Table 40 mm and is the answer not in the manual?
Questions and answers