Before First Use - Kogan 8 Series Manual

20/03/2020
This Appliance Must Be Earthed
Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance's rating
plate.
Should the plug need to be replaced for any reason, it will need to completed by a Kogan technician or qualified
service agent. The wires in the mains lead are coloured in accordance with the following code:
Green and yellow - Earth
Blue - Neutral
Brown - Live
In the case of a permanent connection, it is necessary to install a double pole switch. The switch must not break the
yellow and green earth cable at any point.
The wire coloured green and yellow must be connected to the terminal marked with the letter or by the earth symbol or
coloured green and yellow.
Any such maintenance should only be carried out by a qualified electrician and you should always contact Kogan.com if
your dryer is experiencing any malfunction with your product.

Before First Use

Ensure that the electrical connections comply with the installation instructions.
Remove the polystyrene block and any material from the drum:
Open the loading door.
Pull off adhesive strips from inside of the machine to top of the drum.
Remove the two-packaging foam from the machine
https://help.kogan.com/hc/en-us/articles/360043702734
Kogan 8kg Series 8 Heat Pump Dryer - (KAG8PUMPDYA) - Manual – Kogan.com Help Centre
8/23