Table of Contents
Advertisement
Use printer menus
Menu item
Contrast
Best for Content*
0
1
2
3
4
5
Background Removal
Level
‑4 to 4 (0*)
Mirror Image
Off*
On
Negative Image
Off*
On
Shadow Detail
‑4 to 4 (0*)
Scan Edge to Edge
On
Off*
Sharpness
1–5 (3*)
Temperature
‑4 to 4 (0*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item
Automatic Redial
0–9 (5*)
Redial Frequency
1–200 minutes (3*)
Enable ECM
On*
Off
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the contrast of the output.
Adjust the amount of background visible on a scanned
image.
Create a mirror image of the original document.
Create a negative image of the original document.
Adjust the amount of shadow detail visible on a scanned
image.
Allow edge‑to‑edge scanning of the original document.
Adjust the sharpness of the scanned image.
Specify whether to generate a cooler or warmer output.
Description
Specify the number of attempts that the printer redials
before it cancels sending the fax to a specified
destination.
Increase the time between redial attempts to increase
the chance of sending fax successfully.
Activate Error Correction Mode (ECM) for fax jobs.
Note: ECM detects and corrects errors in the fax
transmission process caused by telephone line noise
and poor signal strength.
125
Advertisement
Table of Contents
