Lexmark MX-B468F User Manual page 123

Use printer menus
Menu item
Fax Number Masking
Off*
From Left
From Right
Digits to Mask
0–58 (0*)
Enable Line Connected Detection
Off
On*
Enable Line In Wrong Jack Detection
Off
On*
Enable Extension in Use Support
Off
On*
Optimize Fax Compatibility
Fax Transport
T.38
Analog
G.711
Note: An asterisk (*) next to a value indicates the factory default setting.
Fax Send Settings
Menu item
Resolution
Standard*
Fine
Super Fine
Ultra Fine
Original Size
[List of paper sizes] (Mixed Sizes*)
Orientation
Portrait*
Landscape
Sides
Off*
Short Edge
Long Edge
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the format for masking an outgoing fax number.
Specify the number of digits to mask in an outgoing fax
number.
Determine whether a telephone line is connected to the
printer.
Note: Events are detected immediately.
Determine whether a telephone line is connected to the
correct port on the printer.
Note: Events are detected immediately.
Determine whether a telephone line is used by another
device, such as another phone on the same line.
Note: Events are detected immediately.
Configure the printer fax functionality for optimal
compatibility with other fax machines.
Set the fax transport method.
Note: This menu item appears only if Fax over IP (FoIP)
license bundle is installed in the printer.
Description
Set the resolution of the scanned image.
Note: A higher resolution increases fax transmission
time and requires more memory.
Specify the size of the original document.
Specify the orientation of the original document.
Specify the orientation of the original document when
scanning on both sides of the document.
123