Use printer menus
Menu item
Pitch
0.08–100.00 (10.00*)
Orientation
Portrait*
Landscape
Reverse Portrait
Reverse Landscape
Lines per Page
1–255
PCL5 Minimum Line Width
1–30 (2*)
PCLXL Minimum Line Width
1–30 (2*)
A4 Width
198 mm*
203 mm
Auto CR after LF
On
Off*
Auto LF after CR
On
Off*
Tray Renumber
Assign MP Feeder
Assign Tray [x]
Assign Manual Paper
Assign Manual Envelope
Tray Renumber
View Factory Defaults
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the pitch for fixed or monospaced fonts.
Note: Pitch refers to the number of fixed‑space characters in a horizontal
inch of type.
Specify the orientation of text and graphics on the page.
Specify the number of lines of text for each page printed through the PCL®
data stream.
Notes:
•
This menu item activates vertical escapement that causes the
selected number of requested lines to print between the default
margins of the page.
•
60 is the U.S. factory default setting. 64 is the international factory
default setting.
Set the initial minimum stroke width.
Set the width of the logical page on A4‑size paper.
Note: Logical page is the space on the physical page where data is
printed.
Set the printer to perform a carriage return after a line feed control
command.
Note: Carriage return is a mechanism that commands the printer to move
the position of the cursor to the first position on the same line.
Set the printer to perform a line feed after a carriage return control
command.
Configure the printer to work with a different print driver or custom
application that uses a different set of source assignments to request a
given paper source.
Choose from the following options:
Off*—The printer uses the factory default paper source assignments.
None—The paper source ignores the Select Paper Feed command.
0–199—Select a numeric value to assign a custom value to a paper
source.
Show the factory default value assigned for each paper source.
114