Installing The Right Wall Bracket - Dell Precision 7960 Service Manual

Installing the right wall bracket

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the right wall bracket and provide a visual representation of the installation
procedure.
Steps
1. Align the guide slots on the side wall bracket with the guides on the computer and slide until the cover is seated firmly.
2. Close the side wall cable holder until the holder clicks into place.
Next steps
1. Install the right control
2. Install the air shroud.
3. Install the cooling fan
4. Install the system cover.
5. Follow the procedure in
56 Removing and installing components
panel.
assembly.
After working inside your computer.