Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Press the memory module down with your thumbs until the securing clips firmly click into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Next steps
NOTE:
AMD graphics cards cannot tie to memory over and including 1 TB.
1. Install the
air
shroud.
2. Install the
system
cover.
3. Follow the procedure in
Expansion card
Removing the riser card 1
Prerequisites
1. Follow the procedure in
2. Remove the
system
cover.
3. Remove the
air
shroud.
About this task
The following images indicate the location of the riser card 1 and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
63