Steps
1. Align the holes on the expansion card riser with the guides on the system board.
2. Push the release button on the riser and holding the edges lower the riser card 3 into its connector on the system board
connector.
3. Tighten the captive screw to secure the riser card 3 to the computer.
Next steps
1. Install the
air
shroud.
2. Install the
system
cover.
3. Follow the procedure in
Removing the riser card 4
Prerequisites
1. Follow the procedure in
2. Remove the
system
cover.
3. Remove the
air
shroud.
About this task
The following images indicate the location of the riser card 4 and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
73