Table of Contents
Advertisement
Steps
1. Insert the coin-cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the
connector.
2. Press the battery into the connector until it locks into place.
Next steps
1. Install the
air
shroud.
2. Install the
system
cover.
3. Follow the procedure in
Backplane cover
Removing the backplane cover
Prerequisites
1. Follow the procedure in
2. Remove the
system
cover.
About this task
The following images indicate the location of the backplane cover and provide a visual representation of the removal procedure.
38
Removing and installing components
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
