Dell Precision 7960 Service Manual page 92

Table 11. System setup options—Serial Communication menu (continued)
Serial Communication Settings
Serial Port Address
External Serial Connector
Failsafe Baud Rate
Remote Terminal Type
Redirection After Boot
Table 12. System setup options—System Profile Settings menu
System Profile Settings
System Profile
CPU Power Management
Memory Frequency
Turbo Boost
Energy Efficient Turbo
C1E
C-States
Memory Patrol Scrub
Memory Refresh Rate
Uncore Frequency
Energy Efficient Policy
Monitor/Mwait
Workload Profile
CPU Interconnect Bus Link Power
Management
PCI ASPM L1 Link Power Management
Table 13. System setup options—System Security menu
System Security Settings
CPU AES-Ni
System Password
Setup Password
Password Status
92 BIOS setup
Allows selection of Serial Port Address.
By default, the COM1 option is selected.
By default, Serial Device 1 drop down is selected.
By default, 115200 drop down is selected.
Allows selection of Remote Terminal Type.
By default, the VT100/VT220 option is selected.
Enables or disable the Redirection After Boot.
By default, the Enabled option is selected.
By default, Performance Per Watt (DAPC) drop down is selected.
By default, the option is System DBPM (DAPC).
By default, Maximum Performance drop down is selected.
By default, the option is Enabled.
By default, the option is Enabled.
By default, the option is Enabled.
By default, the option is Enabled.
By default, the option is Standard.
By default, the option is 1x.
By default, the option is Dynamic.
By default, the option is Balanced Performance.
By default, the option is Enabled.
By default, Not Configured drop down is selected.
By default, the option is Enabled.
By default, the option is Enabled.
By default, the option is Enabled.
Set, change, or delete the System password.
Set, change, or delete the Setup password.
Unlock or lock the Password Status.
By default, the Unlocked option is selected.