Installing The 2.5 Inch Hard Drive Into The Drive Bracket; Removing System Fan - Dell OptiPlex 7060 Micro Service Manual

Installing the 2.5 inch hard drive into the drive bracket

1 Align and insert the pins on the drive bracket with the slots on one side of the drive.
2 Flex the other side of the drive bracket, and align and insert the pins on the bracket into the drive.
3 Install the:
a 2.5 inch hard drive assembly
b Side cover
4 Follow the procedure in
System fan

Removing system fan

1 Follow the procedure in
2 Remove the Side cover.
3 To remove the system fan:
a Press the blue tabs on both sides of the system fan [1].
b Slide and lift the system fan to release it from the system.
c Turn the system fan over to remove it from the system [2].
After working inside your computer.
Before working inside your computer.
Disassembly and reassembly 17