Installing The Riser Card 1 - Dell Precision 7960 Service Manual

Steps
1. Hold and pull the blue strip to disconnect the riser card 1 cables from their connectors on the system board.
2. Loosen the captive screws on the riser and computer.
3. Push the release button on the riser and holding the edges lift the riser card 1 from the riser connectors on the system
board.

Installing the riser card 1

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the riser card 1 and provide a visual representation of the installation procedure.
Removing and installing components 65