Installing The 2.5 Inch Hard Drive Into The Drive Bracket; Installing 2.5-Inch Drive Assembly - Dell OptiPlex 3070 Microo Service Manual

Installing the 2.5 inch hard drive into the drive bracket

1. Align and insert the pins on the drive bracket with the slots on one side of the drive.
2. Flex the other side of the drive bracket, and align and insert the pins on the bracket into the drive.
3. Install the:
a. 2.5 inch hard drive assembly
b. Side cover
4. Follow the procedure in
Installing 2.5–inch drive assembly
1. To install the hard drive assembly:
a. Insert the hard drive assembly into the slot on the system.
b. Slide the hard drive assembly towards the connector in the system board until it clicks into place.
24 Disassembly and reassembly
After working inside your computer.