Installing The Slim-Odd Bracket - Dell D29M002 Service Manual

Steps
1. Pry the slim-ODD bracket to release it from the slot on the ODD.
2. Remove the slim-ODD bracket off the ODD.

Installing the slim-ODD bracket

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the slim-ODD bracket and provides a visual representation of the installation
procedure.
Steps
1. Align and place the slim-ODD bracket on the ODD slots.
2. Snap the slim-ODD bracket into the slim ODD.
Next steps
1. Install the slim Optical Disk
2. Install the fan duct.
3. Install the side cover.
Drive.
Disassembly and reassembly 47