Steps
1. Align the backplane cover with the guide slots on the computer.
2. Slide the backplane cover to the front of the system until it fits into place.
Next steps
1. Install the
system
cover.
2. Follow the procedure in
Front PowerEdge RAID Controller (PERC) module
Removing the front PERC module
Prerequisites
1. Follow the procedure in
2. Remove the
system
cover.
3. Remove the
backplane
About this task
The following images indicate the location of the front PERC module and provide a visual representation of the removal
procedure.
After working inside your
Before working inside your
cover.
computer.
computer.
Removing and installing components
41