Table of Contents
Advertisement
Installing the Input and Output bracket
1. To install the Input and Output bracket (I/O) bracket:
a) Align the slots on the Input and Output bracket (I/O) bracket with the ports on the system board [1].
b) Replace the three screws (M3x5) that secure the I/O bracket to the display assembly base [2].
2. To install the PSU cable:
a) Route back the power supply cables through the retention clips in the chassis [1].
b) Slide and replace the power supply socket on the chassis [2].
c) Replace the single (M3x5) screw securing the power supply socket to the I/O bracket [3].
Removing and Installing components
61
Advertisement
Table of Contents
